Dress up your devices with mrDesign skins

mrDesign.com use only finest quality skins. Skins are a very thin, removable covers for protecting your devices. They feature stunning, photo-quality graphics ranging from fashion patterns designs to sports teams jerseys colors customized to fit your needs. It is a work of art for you and your love ones.

Features:

• Made out of thin self-adhesive vinyl, not paper
• Digitally processed with UV resistant inks
• Full-color design printed on Engineered Vinyl Film
• Skin has an ultra-clear, scratch resistant coating for maximum durability and photo quality finish
• Easy application in minutes
• Leaves no harmful residue when removed
• Easy to clean with moist cloth
• Custom to fit your portable devices
• 100% Made in the United States

How to apply graphic skins to laptop and other devices

There are a lot of high tech gadgets nowadays that you can’t do without. Procuring a laptop, cell phone, gaming and entertainment equipment whether handheld or console type with controller is a costly investment that should be given the best care possible and you can do that with removable skins. Whether your unit is slightly used or brand new, removable skins are designed to give your devices the protection that they need for the exterior not to deteriorate due to constant use.

Here are the steps on how to apply removable skins for all the gadgets mentioned above. To ensure that the removable skin will fit your device perfectly, make sure you order for a quality supplier of removable skins. Cutting is not an easy procedure and if you attempt to do this on your own or order from a supplier who has not prepared the removable skin for you; the vinyl cover may not conform to all the curves of your unit.

For best results: Apply indoors with a dust free environment.

Tools required: Masking tape, new razor blade or scissor, squeegee or credit card, soft cloth, tape measure.

Step 1: Make sure your notebook is clean. Wipe it off with a soft cloth. The notebook should be free of dust, fat and grease - otherwise the skin may not stick to your laptop as well as it’s supposed to.

Step 2: Layout the graphic skin onto the laptop to determine exactly where you want the graphic skin installed. Apply a strip of tape vertically through the center of the graphic skin and lightly tape each end of the graphic skin to the laptop.

Step 3: Remove the positioning tape on either side of the center hinge from the panel and peel the liner paper away from this portion of the graphic. Temporarily secure the end of the graphic skin to the laptop surface and cut the backing paper off near the center hinge.

Step 4: Lift the edge of the graphic skin from the laptop surface and use the squeegee or credit card to rub the graphic skin into place using short, overlapping vertical strokes from the center of the graphic to the end.

Step 5: Remove the tape hinge from the center of the graphic skin. Remove the remaining backing paper and squeegee the remaining half of the panel onto the laptop.

You can use these 5 steps to apply the graphic skins to other devices. However with the small devices such as iPods, iPhones…., they are easier to apply because they are already made to fit.

If any small bubbles have appeared during installation, they can be removed squeezing the trapped air out with the tip of your finger or if skin is removable, you can lift the graphic skin up and reapply in that area.